Pull 01 - Patinated Bronze - 21685

Pull 01 gives a nod to brutalist architecture with its monolithic nature, a forceful object, it sits at the crux of construction, transcending risk-taking in design. Designed to sit flush against a surface, this piece embodies restraint and proportion. Design in hand, a mundane action becomes a considered instant. It is simple, elegant and robust. Australian Design No 202216355

Imperial

Metric

Width

31/32"

25.0mm

Height

13 25/32"

350.0mm

Length

13 25/32"

350.0mm

Center to Center

3 30/32"

100.0mm

Projection

2 18/32"

65.0mm
Download Specifications Sheet — PDF
Download Installation Instructions — PDF
Download DWG File

Download DXF File

Download GLB File

Download MTL File

Download NWC File

Download OBJ File

Download RFA File

Download SAT File

Download SKP File

Download STEP File
Patinated Bronze

For the Patinated Bronze finish, an oil rubbing of the existing Bronze gives an aged appearance, darkening the vibrant Bronze colour into a rich organic hue.

Care:
This finish will wear over time to expose the bronze underneath. This finish will feature lighter areas at points of contact where the bronze has been rubbed back to a golden tone. Water and chemical-based cleaners, soaps or abrasive materials will damage the finish and should not be used. We recommend cleaning with a soft lint-free cloth, followed by a beeswax protectant. As the finish is unlacquered, regular application of the wax will be necessary to maintain the original chemically patinated finish.

Caution:
As the finish is unlacquered, regular application of beeswax will be necessary to maintain the original chemically patinated finish.